President Hasso Constantin
Vice President Tony Ney
Secretary Ian co*cks
Treasurer Ian co*cks
Membership Secretary Ken Sullivan
Education Officer Warren Rankin
Event Coordinator David King
IN THIS ISSUE: Views expressed by contributors are not necessarily
those of the Guild
Presidents Report Page 2
Editorial Page 2
Proposed Mission Statement Page 3
Around the Clubs Pages 4 - 8
Vale Bill Shean Pages 9 – 10
Vale Tina Dato Page 11
Timber for Turning Page 11
Tool Definitions Pages 12 – 13
Guild & Affiliates Calender of Events 2015 Page 14
List of Affiliate Representatives Page 15
1
BY HAND & EYE
The Official Newsletter of the Sydney Woodturners Guild Inc.
The Guild Committee for 2015:
Guild Membership Fees
As of 1st April 2015 fees will be $35:00
Membership renewal for 2015 - 2016
Due 1st July 2015 will be $35:00
JUNE/JULY 2015
I cut it twice and it’s still too short.
I work to support my woodworking habit
I’m a professional toothpick maker.
EAT, SLEEP,
TURN WOOD...
GO WITH
THE GRAIN
GRASSHOPPER
By Hand & Eye Page 2
Presidents Report
President Hasso is on holidays
Editorial by Ian co*cks
In January I offered to compile the By Hand & Eye to ensure we had a publication to communicate with you
the member.
Since then no one has come forward to offer to assist with the compilation of the By Hand & Eye. I have
heard some members are not happy with the current format; I would like to remind members that like all
other Guild committee members, I do this voluntarily if you are not happy about the content then do
something about it.
By Hand and Eye is supposed to be your Newsletter yet very few submit articles for inclusion in it.
We all lead busy lives some have work commitments, family responsibilities, the need to spend time at the
lathe, club commitments. It does take long to submit a article for publication, just make sure it is in word
format, for those members who do not have access to a computer put pen to paper and I will convert it .
I have asked that the Guild to consider changing the publishing of By Hand & Eye to a quarterly publication.
Affiliated club representatives have been asked to seek from you the member your feeling on this.
By going to a quarterly publication By Hand & Eye will I believe deliver a more informed publication to you
the member. Cost will not change that much as size will be around the 20—30 page mark.
In this edition I have included a list of some suitable timbers for Woodturning. (See page 11)
To stimulate member contribution I am asking from you a list of your favourite timber and perhaps the pro and
cons of that particular timber. By Hand &Eye needs your contribution
So come on get typing on the computer or pen to paper and let’s have some input from you the members.
What was the last project you under took? Send in some photos and a few lines on how you went about
completing the project.
Articles can be sent to [emailprotected]
Snail Mail: Secretary, 2 Docharty Street Bradbury NSW 2560
mailto:[emailprotected]
By Hand & Eye Page 3
Proposed Mission Statement
MISSION STATEMENT: The mission of the Sydney Wood Turners Guild Inc is to aid the affiliated regions
to promote woodturning as a creative skill among existing Woodturners and the general public.
EXECUTION: This will be achieved by:
Education including OH&S practices
Information and technical support.
Practical demonstration and Community Service projects.
SUGGESTED TARGETS TO ACHIEVE THIS MISSION 2015/2016
Reach 500 members by AGM 2016
Run two Train the Trainer courses by AGM 2016
Create a set of Basic on line training videos
Buy/Supply promotional material, (Guild) Banners, pamphlets) to regions by November 2015.
My wife came in today and asked me if I would go do some wood turning on the lathe.
“Ah”, I asked “what do you need? Maybe a new dibber or possibly a rolling pin or a vase?
I have Persimmon, Hickory, Mesquite, a little bit of Walnut and a tad of Oak. What would you
like?”
“Oh, I don’t care. I need about six bags of shavings for the flower beds.”
By Hand & Eye Page 4
AROUND THE CLUBS
HORNSBY DISTRICT WOODTURNERS INC.
NEWSLETTER APRIL 2015
Twenty two members were welcomed to our April meeting run by our temporary joint conveners John
Markham and Greg Croker.
Firstly a general outline of, honey-dipper sales and turning, Simon's and Regan's woodturning prizes at the
Easter Show – congratulations to you both, Carbatec's new monthly catalogue
- see details later, Trend Open Days Friday and Saturday 17th & 18th April,
April's BH&E (editor still required) is on the web at
www.sydneywoodturners.com.au and a few hard copies are available at the
meeting, the Autumn Raffle next month as well as the usual Spring Raffle in
October.
Finally the disappointing advice of the SWG fee increase was
discussed/debated and the HDWT secretary asked to write again to the Guild
listing our thoughts.
The Information Exchange segment was again well supported.
Nick then showed a short branch, and sprig of African fig? and a large wet section of Australian cedar trunk
both from Chowder Bay Navel Depot. Nick requested advice as to the cedar's processing either by turning or
carving, hopefully saving the bark. Immediately discussion commenced as to how best handle his project.
In summary members thought that drying first would be the beginning of a long term project that could take
3 years plus, but if chosen paint with end sealer now, wrap in newspaper pages and/or partially seal in a
plastic bag such that drying would be slowed and possibly prevent major cracking while storing in a cool area.
For immediate action carve or turn the inside of the blank preferably 'in one movement' to say 35 mm
average wall thickness then end seal and dry as above for say 6 months before finishing. Glue the bark
before, or as it becomes loose and complete the piece continuing with care to minimise cracking. Cracking
should now only be minor and can be overcome with CA glue as above using pure lemon oil to pre-wet the
crack and surrounding wood to avoid staining.
Brian showed a versatile centre finder posted from the USA (also available from CarbaTec)
By Hand & Eye Page 5
The Show & Tell 'forum' was run by John
Markham and first was Simon Begg's RAS
trophy turnings, the laminated Senegal
vase (First prize) form American walnut
and rock maple, and the miniature box
(Second Prize) of queen ebony and
cocobolo; both turnings were wax finished.
Marvellous and a well deserved double.
Also displayed was a large perfect Lego
man from Aust red cedar and Huon pine.
After telling about the turnings and wins
Simon resumed his seat accompanied by
sustained acclimation
Mallets were shown in Mulga and various
other hardwoods and a smaller mallet with a
brass head.
A range of waney edged turnings were shown
by Tim, Greg and John Edwards. Ray also
showed an Aust. Cedar plate nicely finished
with good grain.
While Ian showed a larger right angle scale to find
the centre of approximately circular logs based on
the theory of scribing diameters after setting the
other scale as a tangent, (to the circumference).
Finally it was noted by Tim that for larger diameter
logs possibly the best 'jig' is to use a clear Perspex
sheet with the centre and a number of useful
diameter concentric circles scribed onto the sheet
allowing the centre to be optimised. Remember to
always balance the blank before turning.
A Sorby bead scraper was presented and discussed;
CA glue on bowls was mentioned and suggested
that accelerator be used on cracks before the glue
application to ensure the latter's deep adhesion.
By Hand & Eye Page 6
Elwyn showed an oval version of the Scobie wave bowl. Made some time ago from jacaranda it is now showing a warm
golden glow.
Ted showed a combination vase from nicely grained tulip satinwood and equipped with perfumed franipani
flowers.
Tim also showed his egg and his developed design; he also gave a run-down on the design and the necessity
to have a reference diameter for the template. As with the other S&T items a discussion followed on this
design and usage, however agreement was not reached as to which end of an egg first sees the light of day!
Lastly Lloyd showed his honey dipper tool. Described as a production tool to scrape all four groves in one
action it caused quite some comment. See its photo superimposed on the April CarbaTec magazine.
After lunch Richard Raffan's DVD was shown on turning boxes; (and a box of any design, preferably with a
finial, was nominated as homework for May). He certainly demonstrates great examples of box turning and
with expert turning technique in general. Words cannot describe Richard's turning adequately so if you
missed the presentation see the DVD ASAP.
By Hand & Eye Page 7
To complete the day the turning of a letter opener was demonstrated by Greg Croker.
Letter openers are straight forward items to turn and a design from a Mike Darley book was chosen. The
selected design was the Cocobolo design and is about 8 inches long, with an ogee, a couple of beads, a
broad cove and a long blade.
Select woods that are relative dense and strong such that the blade will hold a 'sharp' edge. In this demo the
woods selected were claret ash, jarrah and river she oak and selected also to show at least some grain.
Start with a 10 inch blank between centres about 1.25 inches square and mark out the lengths and diameters
onto the roughed down blank. Turn the cone that will become the blade first with the blade tip about 3/8
inches in diameter.
Turn the handle to give a pleasing ogee, then the beads and the broad cove to link with the previously turned cone
using a 3/8 inch spindle gouge. Sand through the grits to say 320 or 400 and part off at the handle end taking care not
to damage the pimple at the handle’s top
Saw off the remaining scrap at the blade end without damaging or weakening the wood.
To finish the letter opener sand the cone on a linisher using 80 grit to form the blade profile shown but with
a somewhat blunter tip to ensure enduring strength. Again sand through the grits to 320 or 400 to produce
the desired completed shape and apply your preferred finish.
Two simple finishes were quickly demonstrated; Danish oil and shellac.
A coat of Danish oil was applied to three previously turned openers which was quickly absorbed indicating
that at least three coats eight hours apart will be necessary for a satisfactory finish. Secondly the use of
standard shellac solution on another two pre-turned openers was shown. The first shellac coat was again
absorbed quickly and more shellac coats will also be needed for a satisfactory finish. Sand with 400 grit
between coats if required to obtain a good finish.
Both finish types will be completed during the
month with additional coats and brought for Show
& Tell judgement next meeting.
By Hand & Eye Page 8
Next meeting Saturday May 9th from 10 am and please bring your items for the Autumn Raffle.
Earlier note was made that CarbaTec has commenced a monthly 32 page Price Shavings catalogue the cover
of which is the background to the supa-scraper photo in S&T. If you would like your monthly copy of this
catalogue by email or post go to www.carbatec.com.au/newsletter and sign-up.
Macarthur District Woodturners
28 members and several guest were welcomed to our April meeting .The meeting discussed several topics
including the recent raise in the Guild membership fees it was also discussed about the use of our equipment
and trailer by the Guild and it was decided to offer the use of the equipment and trailer to the Guild at no cost
(except for damages and loss of equipment).
Michael Twemlow will be in charge of the trailer to ensure all equipment is returned and in good working
order.
Show and tell was again interesting with several members displaying their turning and an explanation on the
way they went about turning and finishing the object.
By Hand & Eye Page 9
On behalf of all Sydney Woodturners Guild members our heartfelt condolences go out to
Bill Shean’s family Bill passed away on the 28th April 2015.
Bill Shean the Master Wood Turner.
As we recall Bill joined the Southern Highlands Woodies around the late 1990’s, although from memory he
had been a member of Western Sydney guild, as well as secretary of the Sydney Woodturners Guild and was
also editor for the Guilds newsletter, By Hand and Eye for some years, prior, to moving to Bargo where he was
to become Guild Rep for the Southern Highlands Wood Turners.
Bill knew we didn’t know much about wood turning by the questions we were asking, and with that at each
meeting he proceeded to teach us some of the finer points of woodturning, and to this day we are still grateful
for his patience and persistence. We are sure that many of the members of the club as well as the members of
other clubs Bill demonstrated, attended, and taught at, are also grateful for the time and effort he invested in
them, Bill was a very sought after demonstrator at many of the clubs around Sydney.
As with all clubs there is always a shortage of office bearers, and Bill was elected to the committee, he then
conned John Harris into becoming secretary, because he required someone else to make up the numbers for
some of the changes he felt the club needed to make, and there were many, starting with the Guild wanting to
press ahead with incorporation, it was Bill who came up with the idea that our incorporated name should be the
SOUTHERN HIGHLANDS WOODIES.
The next problem Bill wanted to address was getting members to bring along their turnings and other projects
to the show and tell segment of the meeting, out of about 40 members we were lucky to get 5 pieces to look at
and admire, it was quite a puzzle?
Bill had been racking his ever active brain for a solution and ran the idea of an award past John, we agreed it
was a good idea and we ended up with the “Excellence award”. So we thought it fitting that we should buy a
very nice piece of timber as the trophy, and then gave members the opportunity to win this trophy by simply
bringing in their turnings for appraisal at the monthly meetings, well at the next monthly meeting you could
have knocked us both over with a feather the display table was full of members turnings, full credit to Bill his
idea worked.
Bill was often asked to conduct show and tell at our meetings and the comments and encouragement he offered
to members was invaluable, as often their work would show great improvement as a result.
Bill really looked forward to his annual road trip on the second weekend of September to Phillip Island, where
the Wonthaggi wood turners held their Turn Around Down Under event, where about 100 turners would gather
for the weekend to turn, share ideas and techniques and just talk and renew old acquaintances.
Others also accompanied Bill on these trips, Anna Dawes, Sandy May, Peter Herbert and John Harris. John
recalls on many of the trips how Bill liked his music by artists such as Catherine Jenkins, John however had
VALE
Bill Shean passed away28th April 2015
By Hand & Eye Page 10
musical tastes quite different to Bill and a compromise was reached, whoever was driving got to play their
style of music, so John did most of the driving, because Bill was quite happy to be the passenger and read and
talk, mainly talk, as that was another one of Bills passions, talking.
Of course the return trip from Phillip Island was via a different route and went through the hills and forests of
huge mountain ash trees as well as the town of Healesville, where Bill and John discovered a great little coffee
shop that also had some mouth-watering cakes and goodies, so this stop on the way home was mandatory.
When Bill and Dianne moved to Tea Gardens from Bargo it was thought that Bill would seldom visit the
Woodies, however, each month he made the effort to attend the Saturday meetings and would regularly
demonstrate at these meetings, his visits were always met with members who were keen to share an idea or just
see what he had made for show and tell.
Bills passing will now leave a huge hole in the lives of many as well as the woodturning community and like
many others Bill has known, it will be very difficult without him, a great teacher, mentor, wood turner, and
above all a great friend to many.
Ps. Keep producing those decorative shavings Bill.
Bill Shean Sydney Woodturners Membership 647 dated 2.9.1993 Active 21 years
Initially a member of ‘Western Sydney and the Blue Mountains ‘region of the guild before his move
to the Southern Highlands
Editor woodchips c. May 2006 – September 2011
Editor BHYE 2 ½ years therefore April 2006 – Sept 2008
Last year as Guild Rep for Southern Highlands 2005-6
Guild Committee ? Secretary? circa late 1990’s
Sold at markets both days every weekend for a year or so.
Demonstrated at guild regions and for the Blue Mountains Decoration Day(s)
Popular demonstrator, very thorough
Gave great critiques of the work of others, very encouraging and informative
Great teacher, mentor
Informal workshops for several years with Kaye Paton and Anna Dawes, with Sandy May also
attending latter on.
Comments received
“is believed to have had every single tool imaginable”
“Incredibly sharing with info, the ‘how to’, a great teacher, ..”
An ideas man, lots energy, a breath of fresh air
Judged woodturning at the Royal Easter for two years
By Hand & Eye Page 11
Vale Tina Dato
On behalf of all Sydney Woodturners Guild members our heartfelt condolences go out to
Mario Dato (Eastern) on the death of his wife. Tina passed away on the 1st May 2015.
Timbers for Turning
Walnut English Elm
NSW Rosewood
NSW Rosewood
Tasmania Blackwood
English Beech
African Zebrawood
Brazil Bloodwood
Camphor Laurel
Huon Pine
Celery Top Pine
Blackwood
Sassafras
Myrtle
Mulga
Wilga
Myall
Brigalow
Ironwood
Vine Tree Lancewood
Red Bauhinia
Cork-bark Tree False Sandalwood
African Blackwood
Cedar Some Fruit Tree Varieties
Some of these timbers are now rare, there are many other timbers not included in this list
Photos courtesy of Trend Timbers Web Page
By Hand & Eye Page 12
While not pertaining to woodturning, I am sure we can all relate to these definitions
Tool Definitions
DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so
that it smacks you in the chest and flings your beer across the room, splattering it against that freshly painted
part you were drying.
WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under the workbench with the speed
of light. Also removes fingerprint whorls and hard-earned guitar calluses in about the time it takes you to say,
"Ouch...."
ELECTRIC HAND DRILL: Normally used for spinning pop rivets in their holes until you die of old age.
PLIERS: Used to round off bolt heads.
HACKSAW: One of a family of cutting tools built on the Ouija board principle. It transforms human energy
into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your
future becomes.
VISE-GRIPS: Used to round off bolt heads. If nothing else is available, they can also be used to transfer
intense welding heat to the palm of your hand.
OXYACETYLENE TORCH: Used almost entirely for lighting various flammable objects in your shop on
fire. Also handy for igniting the grease inside the wheel hub you want the bearing race out of.
WHITWORTH SOCKETS: Once used for working on older British cars and motorcycles, they are now used
mainly for impersonating that 9/16 or 1/2 socket you've been searching for the last 15 minutes.
HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after you have installed your
new disk brake pads, trapping the jack handle firmly under the bumper.
EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering an automobile upward off a hydraulic jack
handle.
TWEEZERS: A tool for removing wood splinters.
PHONE: Tool for calling your neighbours to see if he has another hydraulic floor jack.
SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for spreading mayonnaise; used
mainly for getting dog **** off your boot.
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps off
in bolt holes you couldn't use anyway.
TWO-TON ENGINE HOIST: A tool for testing the tensile strength on everything you forgot to disconnect.
CRAFTSMAN 1/2 x 16-I NCH SCREWDRIVER: A large prybar that inexplicably has an accurately
machined screwdriver tip on the end opposite the handle.
By Hand & Eye Page 13
AVIATION METAL SNIPS: See hacksaw.
TROUBLE LIGHT: The home mechanic's own tanning booth. Sometimes called a drop light, it is a good
source of vitamin D, "the sunshine vitamin," which is not otherwise found under cars at night. Health benefits
aside, it's main purpose is to consume 40-watt light bulbs at about the same rate that 105-mm howitzer shells
might be used during, say, the first few hours of the Battle of the Bulge. More often dark than light, its name is
somewhat misleading.
PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style paper-and-tin oil cans and splash
oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads.
AIR COMPRESSOR: A machine that takes energy produced in a coal-burning power plant 200 miles away
and transforms it into compressed air that travels by hose to a Chicago Pneumatic impact wrench that grips
rusty bolts last over tightened 58 years ago by someone at ERCO, and neatly rounds off their heads.
PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to
replace a 50¢ part.
HOSE CUTTER: A tool used to cut hoses too short.
HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod
to locate the most expensive parts not far from the object we are trying to hit.
MECHANIC'S KNIFE: Used to open and slice through the contents of Cardboard cartons delivered to your
front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector
magazines, refund checks, and rubber or plastic parts.
DAMMIT TOOL: Any handy tool that you grab and throw across the garage while yelling "DAMMIT" at the
top of your lungs. It is also the next tool that you will need.
EXPLETIVE: A balm, usually applied verbally in hindsight, which somehow eases those pains and
indignities following our every deficiency in foresight.
AMERICAN SCREWDRIVER: The good old hammer applied with some force to the stubborn object.
12th-14th June 2015
10:00am -4:00pm SYDNEY SHOWGROUNDS SYDNEY OLYMPIC PARK
HALL 6
By Hand & Eye Page 14
Easter Show round up for 2015
Even though the time at the show was only 4 days we all had a great and busy time from 7.30 am till 4pm.
To John Cruickshank, Michael Twemlow, Judy Hilling, Michael and Liz Montuori, Ken Morgan, Ted Batty,
Tony Ney, John Cottle, John Jewell, Jack and Marj Butler, Hasso Constantin, Mario Dato, Phil Mcload,
Christos Constan, Bob Thomas. I would like to say a big thankyou from myself, your Clubs and the Guild for
your help at the Show without your help we would not be able to promote the art of woodturning and you’re
Clubs.
And a big thanks to Bankstown for the loan of their Lathes and equipment.
The Arts competition this year was down with only 20 items entered cross three categories and resalts which
are
Class 294 Platters and Bowls Class 295 Segmented
1st Keith Jones 1
st Simon Begg, Hornsby
2nd
Simon Begg, Hornsby 2nd
Ken Morgan, Bankstown
3rd
Kevin Santwyk, Bankstown 3rd
Doug Midgey, Bankstown
HC Regan Leatck HC Christos Constan, Eastern
Class 296 Innovative Class 299 Wooden Box Work
1st Ted Batty, Bankstown, Kiama 1
st John Evans
2nd
John Uriwin, Kiama 2nd
Simon Begg Hornsby
3rd
Simon Begg, Hornsby 3rd
Hasso Constantin, Bankstown
HC Ken Morgan, Bankstown
Congratulations to all who entered.
We have a opportunity to put one more class in next year to make it four classes. Please read the two
suggestions below and let me know by the 1st of July as I will be emailed for details for next year.
VESSELS. Vessels are vase or urn shaped in general, can have a lid, but the top opening must be much smaller
in diameter than the actual base. The piece can be embellished in any way, but the judge/s must be satisfied
that the piece shows 80% woodturning. The Vessel must NOT be segmented, but can have minimum of
contrasting wood as part of the embellishment.
SPINDLE TURNING. Entries will be made up predominantly of spindles turned completely between centres.
This can be, but is not limited to, spindle backed chairs, wot nots, etc., but must consist of an assembly which
includes two or more spindle turnings.
My way of thinking with items you make! Is you put your work in to the Easter Show is to show your
creations and beauty of your pieces and to promote the art of woodturning and if you win a prize, well that is a
bonus. And I fought to have a Wood turner to judge the comp so we all get a far go so come on everyone lets
fill the cabinet up next year and beyond.
Again thanks to all for your help. David King and the Easter Show 2016 Commences 17th
March 2016
By Hand & Eye Page 15
Guild & Affiliates Calender of Events 2015
GUILD MEETINGS
JULY 27th
SEPTEMBER 28th
NOVEMBER AGM 30th
2015 CALENDAR
HORNSBY DISTRICT WOODTURNERS INC
HORNSBY MEN'S WOODWORKING SHED
33A SEFTON RD THORNLEIGH
2015 SATURDAY
Jan No Meeting
Feb 14
Mar 14
Apr 11
May 9
Jun 13
Jul 11
Aug 8
Sep 12
Oct 10
Nov 14
Nov FRI 27 NOV XMAS
TEA
Dec No Planned Meeting
TBA
Saturdays 10 am to finish (approx 3:00-3:30 pm)
Visitors, please confirm attendance with the Convenor
Lindsay Skinner on 9679 1055
Macarthur
Woodturners Inc.
SUNDAY
JUNE 28th
JULY26th
AUGUST 30th
SEPTEMBER 27th
OCTOBER 25th
NOVEMBER 29th Christmas Party
9:30am – 2:30pm
BANKSTOWN REGION WOODTURNERS INC.
JUNE 6th 20th
JULY 4th 18th
AUGUST 1st 15th
SEPTEMBER 5th 19th
OCTOBER 3rd 17th
NOVEMBER 7th 21st
8:30am -4pm
MENAI REGION WOODTURNER INC.
JUNE TBA
JULY TBA
AUGUST TBA
SEPTEMBER TBA
OCTOBER TBA
NOVEMBER TBA
SYDNEY NORTHERN BEACHES WOODTURNERS INC.
Tuesdays Fridays JUNE 2
nd,9
th,16
th,23
rd,30th 5
th, 12
th, 19
th,26th
JULY 7
th, 14
th, 21
st, 28
th 3
rd, 10
th, 17
th,
24th
, 31st
AUGUST 4th
, 11th
, 18th
,25th 7
th, 14
th,21
st, 28
th
SEPTEMBER 1
ST, 8
TH, 15
TH,
22ND
,29TH
4TH
, 11TH
,
18TH
,25TH
OCTOBER 6
th, 13
th, 20
th,27
th 2
nd, 9
th, 16
th,
23rd
,30th
NOVEMBER 3
rd, 10
th, 17
th,24
th 6
th, 13
th, 20
th,
27th
9am – 12 noon
SOUTHERN HIGHLAND WOODIES INC.
JUNE 27th
JULY 25th
AUGUST 22nd
SEPTEMBER 26th
OCTOBER 24th
NOVEMBER 28th
Meeting start 10:00am till 4:00pm
Location Harbisoncare Village south of Bowral
Eastern Region
Woodturner Inc.
SUNDAY
JUNE 7th
JULY 5th
AUGUST 2nd
SEPTEMBER 6th
OCTOBER 4th
NOVEMBER 1st
By Hand & Eye Page 16
Committee Members 2014/2015
Affiliated Association Representatives
Michael Montuori 0417066073 Bankstown
Phil Mcleod 0418267096 Eastern
Mario Dato 0419404405 Eastern
Christo Constan 0411088180 Eastern
Greg Croker 0294982350 Hornsby
Michael Twemlow 0246284670 Macarthur
John Jewell LM 0296012610 Macarthur
Bill Black 0401701327 Menai
Barry Bendeli 0294161976 Northern Beaches
John Cottle 0299052107 Northern Beaches
Alan Pentecost 0295258347 Southern
Barry Belford 0297714122 Southern
Raymond Elyard 0295848481 Southern
Michael Adamietz 04070201597 Southern Highlands
Find us on the web at:
http:// www.sydneywoodturners.com.au
Email webmaster at:
[emailprotected]
All Correspondence to the Secretary:
Email [emailprotected]
Snail Mail: Secretary
Sydney Woodturners Guild Inc.
2 Docharty Street Bradbury NSW 2560
Phone: 0410 159 180
mailto:[emailprotected]
mailto:[emailprotected]